ษอออออออออออออออออออออออออออออออออออออออออออออออออออออออป
         บ                                                       บ
         บ   Compex FreedomLINE 100TX PCI Fast Ethernet Adapter  บ
         บ     (C) Copyright PDS, 1997. All Rights Reserved.     บ
         บ                                                       บ
         ศอออออออออออออออออออออออออออออออออออออออออออออออออออออออผ

             NDIS2 Driver for Banyan VINES Installation
             ===========================================

        Files required: A:\NDIS2\FLPCI.DOS
                        A:\BANYAN\PROTOCOL.INI

1. Installation Procedure for Banyan VINES
---------------------------------------------
 a. Type Pcconfig. Press <Enter>.
    "Configuring A PC for the Network" appear.

 b. Select "1 -  Network Card Setting", press <Enter>.
    "The possible hardware configuration option are" appear.

 c. Chose "NDIS Ethernet", Press <Enter>.

 d. Key in specified interrupt number, and FLPCI to the
    PROTOCOL bindings = .

 e. Press 'F10' when done. Press <Esc> to exit this screen.

 f. Select "2 - Login Environment Settings. ", Press <Enter>.

 g. Select "1 - Select Default Communications Driver. " , press <Enter>.

 h. Chose "NDIS Ethernet" , press <Esc> to exit this menu.

 i. Press 'F10' when all done.
    "Please wait ...." appear.

 k. Modify the config.sys and protocol.ini files, see the example.


Sample configuration files:

2. Config.sys

   device=c:\banyan\protman.dos /i:c:\banyan
   device=c:\banyan\flpci.dos

3. Protocol.ini file for LAN Manager.

   [protocol manager]
      DriverName = PROTMAN$

   [FLPCI_NIF]
   ;; FLPCI RPOTOCOL.INI SAMPLE

        DriverName = FLPCI$

        ;; To select parameter, remove single ";" in front of parameter
        ;; Lines with double ";;" are text description.

        ;; Range: 16-26.
        ;; Usage: "Slot=nn"
        ;;------------------
        ; Slot = 16

        ;; Options: TP, AUI, BNC, TP_FULL_DUPLEX,
        ;;          TP_LINK_DISABLE, T4, AUTOSENSE.
        ;; Usage: "SIA_Mode=xxx"
        ;;-----------------------
          SIA_Mode = AUTOSENSE

        ;; Options: MB10, MB100.
        ;; Usage: "DATA_RATE=xxx"
        ;;-------------------------
        ; DATA_RATE = MB100


                               -- THE END --