Using EN2NW4.LAN driver in NetWare 386 v3.11 server.
-----------------------------------------------------
If you need to use EN2NW4.LAN driver on NW3.11 file server, 
please follow the instructions below carefully.


     Installation Instructions:

     Installing on NetWare 3.11 (Without SFT III)

                         *** WARNING ***

          If you use the shipping NetWare 3.11 MONITOR.NLM, your server could
          abend when viewing LAN statistics in MONITOR.NLM with these newer
          drivers.  The MONITOR.NLM included in this update corrects this
          problem.

     1.   Rename the old .LAN, MONITOR.NLM, PATCHMAN.NLM files.

     2.   Copy all .LAN and .NLM files (except for PM311IO.NLM, LSLENH3.NLM,
          and IOSHIM.NLM) into your SYSTEM directory.  Do not use PM311IO.NLM,
          LSLENH3.NLM, and IOSHIM.NLM on NetWare 3.11.  These files are for
          NetWare SFT III 3.11 ONLY.

     3.   Load LSLENH.NLM first.  This will automatically load the
          PATCHMAN.NLM.

     4.   Load the corresponding driver for your LAN card (<filename>.LAN). 
          This will automatically load MSM/MSM31X and xxxTSM.NLM.

          Note:  Loading the MSM.NLM  will generate warnings that cause
          MSM31X.NLM to be automatically loaded.  This is normal.  The warning
          messages generated will be as follows:

               MESSAGE

                    Loader cannot find public symbol:

          The message will be followed by the public symbol name.

          To eliminate the warning message on NetWare 3.1x, you can remove
          MSM.NLM and rename MSM31X.NLM to MSM.NLM.

     5.   Verify that you are using the included MONITOR.NLM with these new
          drivers.

          Note:  If you are also running NetWare for Macintosh, you may see a
          conflict with the drivers.  If you do, load file ATK306.EXE.  This
          file is available from your Novell Authorized Service Center (NASC),
          Novell reseller, or from one of Novell's electronic distribution
          tools (for example, NetWire on CompuServe or the Network Support
          Encyclopedia on CD-ROM).


     Installing on NetWare SFT III 3.11

     1.   Rename the old xxx.LAN, xxxTSM.NLM, and MSMxxx.NLM files.

     2.   Copy the new xxx.LAN, xxxTSM.NLM, and MSMxxx.NLM files into the
          directory of each server where files loaded from IOSTART.NCF are
          loaded.  These files should also be put into the SYSTEM directory of
          the SYS: volume for easy server maintenance.

          Do not use LSLENH.NLM, PATCHMAN.NLM, MONITOR.NLM, XLOAD.EXE, or
          LDR001.PTF with NetWare SFT III 3.11.  These files are for NetWare
          3.11 only.

          Do not use the included MONITOR.NLM with NetWare SFT III 3.11.   Use
          the shipping MONITOR.NLM with NetWare SFT III 3.11.  LAN statistics
          are not part of MONITOR.NLM in SFT III 3.11.

     3.   Copy PM311IO.NLM and LSLENH3.NLM into the directory of each server
          where files loaded from IOSTART.NCF are loaded.

     4.   Add "load lslenh3" to the IOSTART.NCF of each server before the load
          statement for the LAN drivers.  This will automatically load
          PM311IO.NLM.

     5.   Load the corresponding driver for your adapter (<filename>.LAN) in
          the IOSTART.NCF of each server after the load statement for
          LSLENH3.NLM.  This will automatically load MSM/MSM31X and
          xxxTSM.NLM.

          Note:  Loading MSM.NLM will generate warnings that cause MSM31X.NLM
          to be automatically loaded.  This is normal.  The warning messages
          generated will be as follows:

               MESSAGE

                    Loader cannot find public symbol:

          The message will be followed by the public symbol name.

          To eliminate the warning message on NetWare SFT III 3.11, you can
          remove MSM.NLM and rename MSM31X.NLM to MSM.NLM.

     6.   If you are using NE2000.LAN, copy IOSHIM.NLM and make sure it is
          loaded before the LSLENH3.NLM.

Provided by:-
		Compex Inc.
		4051 E,La Palma
 		Anaheim, CA 92807
		USA