The drivers you need are in the directories MSLANMAN.DOS, MSLANMAN.OS2 and
NDIS.  The NDIS drivers contained in these subdirectories are used with 3Com
3+Open, Microsoft OS/2 LAN Manager OEM distribution, Release 1.x or 2.x,
and other compatible OEM versions of LAN Manager.  The driver can also used
with IBM LAN Server 3.0, 4.0, Banyan VINES, ARTISOFT LANtastic 5.0, 6.0,
Wollongong Pathway Access, Microsoft Windows for Workgroups v3.11,
DEC PATHWORKS, Sun PC-NFS etc.


The drivers named CN100E conform to the Network Driver Interface Specification
(NDIS) defined by Microsoft/3Com.

Included in MSLANMAN.DOS, and NDIS subdirectories are the following files:

\MSLANMAN.DOS\DRIVERS\CN100TX\CN100E

    CN100E.DOS          The DOS NDIS MAC driver
    PROTOCOL.INI        A sample section of PROTOCOL.INI file

\MSLANMAN.DOS\DRIVERS\NIF\

    CN100E.NIF          Network Information File

\MSLANMAN.OS2\DRIVERS\CN100TX\CN100E

    CN100E.OS2          The OS2 NDIS MAC driver
    PROTOCOL.INI        A sample section of PROTOCOL.INI file

\MSLANMAN.OS2\DRIVERS\NIF\

    CN100E.NIF          Network Information File


\NDIS

    NDIS.TXT            This readme file

    WFW.TXT             The Installation guide for
                        Windows for Workgroups v3.11

    LANMAN.TXT          The Installation guide for
                        LAN Manager

    LANSVR.TXT          The Installation guide for Lan Server

    BANYAN.TXT          The Installation guide for Banyan VINES

    LANTASTI.TXT        The Installation guide for ARTISOFT LANtastic 5.0, 6.0

    PATHWORK.TXT        The Installation guide for DEC PATHWORKS

    PCNFS.TXT           The Installation guide for Sun PC-NFS


\NDIS\DOS

    CN100TXD.NIF         Network Information File for IBM Lan Support Program
    CN100E.DOS          The DOS NDIS/2 driver
    OEMSETUP.INF        Network Information File for Windows for Workgroups
                        v3.11
    PROTOCOL.INI        A sample section of PROTOCOL.INI file


\NDIS\OS2

    CN100TXO.NIF         Network Information File for IBM LAN Server 3.0, 4.0
    CN100E.OS2          The OS2 NDIS/2 driver
    PROTOCOL.INI        A sample section of PROTOCOL.INI file


Sample PROTOCOL.INI Files and Parameters
----------------------------------------
[CN100E_NIF]

  DriverName = CN100E$
; Slot = 1            ;; {1-16}
; SIA_Mode = AUTODETECT
; {SIA_Mode = TP, BNC, TP_FULL_DUPLEX, AUTODETECT}
; DATA_RATE = MB10   ;; {MB10, MB100}

There are several parameters included in the CN100E_NIF section of the
PROTOCOL.INI file. However, the only parameter that you should specify
is the "drivername."

If you change other parameter settings, such as the SIA_MODE, make sure
that it matches the hardware setting.  Otherwise, the adapter may fail.

If you don't specify these settings, CN100TX's NDIS/2 driver
will automatically detect them.


SLOT        Specifies which network adapter is used by the driver.  If you
            have only one CN100TX's PCI LAN card in your machine, this parameter
            is unnecessary!  For two or more CN100TX's PCI LAN cards, this
            parameter is required and cannot be omitted from PROTOCOL.INI.
            For the first CN100TX(E) adapter, Slot=1, and the second one, Slot=2, 
            third, Slot=3,..., etc.

SIA_MODE    Specifies the medium type used by the adapter.
            Acceptable values for this parameter are AUTODETECT, TP, BNC
            and TP_FULL_DUPLEX. If you didn't specify this settings it
            would be AUTODETECT for CN100TX(E).

DATA_RATE   Specifies the line speed for CN100TX(E), default is
            MB100.

            MB100: 100Mbps, MB10: 10Mbps

TX_THRESHOLD
            Specifies the FIFO threshold level during packet transmittion.
            Acceptable values for this parameter are

            Keywords      Level (bytes)            Suppot
            ========    ==================      ===========
              LW128       72    128                  Yes
              LW256       96    256                  Yes
              LW512      128    512                  Yes
             LW1024      160   1024                  Yes
               FP         X    full packet           Yes

-- END of File--