Content:
  --------

      A) Install CN100TX(E) drivers for LANtastic 5.0

      B) Install CN100TX(E) drivers for LANtastic 6.0


A) Install CN100TX(E) drivers for LANtastic 5.0
   ========================================

   LANtastic 5.0 can support following driver: NDIS driver


   Using NDIS driver:
   ----------------------
   For NDIS driver, it's provided the "CN100E.DOS" driver for
   CN100TX(E) Ethernet adapter.  You can use "CN100E.DOS" driver to 
   replace AEXNDIS.DOS which is the NDIS driver offered by ARTISOFT.

   Example  -----  CONFIG.SYS

        DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
        DEVICE=C:\LANTASTI\CN100E.DOS      -------> of CN100TX(E)


   Example  -----  AUTOEXEC.BAT / STARTNET.BAT

        C:\LANTASTI\AI-NDIS BIND_TO=CN100E_NIF
        C:\LANTASTI\AILANBIO
        C:\LANTASTI\REDIR MachineName


   Example  -----  PROTOCOL.INI

        [PROTMAN]
           DRIVERNAME = PROTMAN$
           DYNAMIC = YES

        [CN100E_NIF]
           DRIVERNAME = CN100E$

   Comments:
     If you are using PROTMAN.DOS V1.x, you must use the NO_BIND
     option on the AI-NDIS command line in the STARTNET.BAT,
     and you need to run NETBIND.EXE V1.x before AILANBIO.EXE.


B) Install CN100TX(E) drivers for LANtastic 6.0
   ========================================

   LANtastic 6.0 can support following driver: NDIS driver


  Using NDIS driver:
  ----------------------

   To install CN100TX(E) NDIS driver "CN100E.DOS", you can use the
   LANtastic 6.0 install program, and select "NDIS support for
   network adapters" then insert CN100TX(E) driver diskette, and type 
   path "A:\NDIS\DOS".  The Install program will search for 
   "CN100E.DOS" and "PROTOCOL.INI" and copy these two files to the 
   target directory.

   If you already installed LANtastic 6.0 and need to install
   CN100TX(E) PCI Ethernet Adapter, just replace AEXNDIS.DOS with
   CN100TX(E) NDIS driver "CN100E.DOS" at CONFIG.SYS

   "CN100E.DOS"  is an NDIS driver of CN100TX(E)
   "AEXNDIS.DOS" is an NDIS driver which supported by ARTISOFT


   Example  -----  CONFIG.SYS

        DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
        DEVICE=C:\LANTASTI\CN100E.DOS        -------> of CN100TX(E)


   Example  -----  AUTOEXEC.BAT / STARTNET.BAT

    @echo ===== Begin LANtastic configuration =====
    SET LAN_CFG=C:\LANTASTI
    PATH C:\LANTASTI;%PATH%
    SET LAN_DIR=C:\LANTASTI.NET

    rem Please obtain the NETBEUI.EXE program from Microsoft
    NETBEUI
    AI-NDIS BIND_TO=AEXNDIS_NIF
    AILANBIO @STARTNET.CFG
    REDIR THOMAS @STARTNET.CFG

    SERVER C:\LANTASTI.NET @STARTNET.CFG
    NET LOGIN \\THOMAS
    @echo ===== End LANtastic configuration =====


   Example  -----  Protocol.ini

    [PROTMAN]
    Priority=NETBEUI
      DriverName = PROTMAN$
      Dynamic = Yes

    [NETBEUI_XIF]
      DriverName = netbeui$
      Sessions = 6
      NCBS = 12
      Bindings = CN100E_NIF
      LANABASE = 1

    [CN100E_NIF]
      DriverName = CN100E$


--- End of File ---