NDIS 3.0 driver for PCI Fast Ethernet Adapter
=============================================

Installing driver on Microsoft Windows NT4.0
============================================

1)  In the Main group of NT, choose the Control Panel icon.

2)  In the Control Panel window, choose the Network icon.

3)  In the Network Settings dialog box, choose the Add Adapter
    button. The Add Network Adapter dialog box appears.

4)  In the list of network cards, select "<other> Requires disk from
    manufacturer", and then press <Enter> button.

5)  Insert this driver disk in drive A, enter drive and pathname A:\
    and then choose the OK button.

6)  In the Select OEM Option dialog box, you will see the following
    products in the menu, select the exact product and use OK button
    to install it.

            "PRO120 PCI Fast Ethernet Adapter."

7)  After that, installation is completed. PRO120 adapter becomes one
    of those Installed Adapter Cards and driver become one of those
    Installed Network Software. You can see: "[0x]PRO120 PCI
    Fast Ethernet Adapter" within Installed Adapter Cards menu and
    "PRO120 PCI Fast Ethernet Adapter Driver" within Installed Network
    Software menu.

8)  Now, the SETUP program  has  already  copied  MXNIC.SYS  from
    A:\WINNT directory to C:\WINNT\SYSTEM32\DRIVERS and
    the OEMSETUP.INF from A:\WINNT to C:\WINNT\SYSTEM32
    but renamed it to other installation information file. So next
    time, if you want to add PRO120 adapters to your system, you
    do not need floppy diskette again.

    NOTICE!! C:\WINNT is the directory where your NT O.S. is in.

9)  To complete network installation, remember binding the adapter to
    transport drivers by choosing "Bindings" button under Network Setting
    dialog box.

10) Restarting your system you will acquire network service.