NetWare DOS ODI Server Driver Installation (NetWare 4.11)
=========================================================

Installation Procedure:
-----------------------
1. Insert the Driver Diskette into drive A and check the contents of
   subdirectory  \NETWARE\SERVER.4X
   It should contain the following file :

   MXICSERV.LAN ÄÄÄ  Novell NetWare V4.X, 3.1X Server Driver for
                     PRO120(A) PCI Fast Ethernet Adapter.
   MXICSERV.LDI ÄÄÄ  Novell NetWare V4.0x Server Driver Installation
                     Information File.
   AUTOEXEC.NCF
   MSM.NLM
   ETHERTSM.NLM

2. At the NetWare prompt (indicated by the Server name),
   run the INSTALL.NLM program by typing:

   server name: LOAD INSTALL <Enter>

3. Select "Driver Options (load/unload disk and network drivers)"
   and press <Enter>.

4. Select "Configure network drivers" and press <Enter>.

5. Press the <Ins> key to specify other drivers to install.

6. Press <F3> and specify the driver path (A:\NETWARE\SERVER.4X)
   and press <Enter>.

7. The MXICSERV.LAN driver should appear in your choice list for
   the 'Select a LAN Driver' field. Choose this driver to
   start the driver loading and binding procedure. This
   will allow you to load and bind all 4 frame types supported
   by NetWare.

8. Next time you start up your system, simply follow steps
   2 to 4 to complete the installation.


Installation notes:
-------------------

1. If you are doing the PERFORM3 or ENDURNCE test, you'd better add the
   followings in your AUTOEXEC.NCF of the server,

        Set Immediate Purge Of Deleted Files=ON

2. You had better add the followings in the STARTUP.NCF:

                Set Reserved buffers below 16 meg 200
                Set maximum Physical receive Packet Size=1536