NetWare DOS ODI Server Driver Installation (NetWare 3.11) ========================================================= Installation Procedure: ----------------------- Before you start with the installation process, make sure that the Novell NetWare 386 v3.11 server is properly installed. Similarly, your adapter should also be properly installed in your workstation. 1. Insert the Driver Diskette into drive A and check the contents of subdirectory \NETWARE\SERVER.31X It should contain the following file: MXICSERV.LAN ÄÄÄ Novell NetWare V4.X, 3.1X Server Driver for PRO120(A) PCI Fast Ethernet Adapter. AUTOEXEC.NCF ETHERTSM.NLM LSLENH.NLM MONITOR.NLM MSM31X.NLM PATCHMAN.NLM 2. Copy the above LAN files from the Driver Diskette into the NetWare 386 subdirectory of your server. 3. Run SERVER.EXE from your server. You will see a series of NetWare messages onscreen. 4. Before load server driver you must load above those extension name named NLM driver. You can reference the autoexec.ncf file in \NETWARE\SERVER.31X directory. 5. When the NetWare 386 prompt appears (indicated by a colon), load your server driver. Simply type: : LOAD [c:]MXICSERV FRAME=ETHERNET_802.3 (Command Syntax : LOAD [c:] FRAME=) 6. Bind IPX to the LAN driver. At the NetWare server prompt, type: :BIND IPX MXICSERV 7. After pressing the computer prompts you for the Network Number. For details on how to assign this number, please consult your NetWare 386 Installation Manual. NetWare DOS ODI Server Driver Installation (NetWare 3.12) ========================================================= Installation Procedure: ----------------------- Before you start with the installation process, make sure that the Novell NetWare 386 v3.12 server is properly installed. Similarly, your adapter should also be properly installed in your workstation. 1. Insert the Driver Diskette into drive A and check the contents of subdirectory \NETWARE\SERVER.31X It should contain the following file : MXICSERV.LAN ÄÄÄ Novell NetWare V4.X, 3.1X Server Driver for PRO120(A) PCI Fast Ethernet Adapter. ETHERTSM.NLM MSM31X.NLM 2. copy the above files into the NetWare 386 subdirectory of your server. 3. Run SERVER.EXE from your server. You will see a series of NetWare messages on the screen. 4. Before load server driver you must load above those extension name named NLM driver. You must load msm31x.nlm firstly. Then load ethertsm.nlm. 5. When the NetWare 386 prompt appears (indicated by a colon), load your server driver. Simply type: : LOAD [c:]MXICSERV FRAME=ETHERNET_802.3 (Command Syntax : LOAD [c:] FRAME=) 6. Bind IPX to the LAN driver. At the NetWare server prompt, type: :BIND IPX MXICSERV 7. After pressing the computer prompts you for the Network Number. For details on how to assign this number, please consult your NetWare 386 Installation Manual. Installation notes: ------------------- 1. If you are doing the PERFORM3 or ENDURNCE test, you'd better add the followings in your AUTOEXEC.NCF of the server, Set Immediate Purge Of Deleted Files=ON 2. You had better add the followings in the STARTUP.NCF: Set Reserved buffers below 16 meg 200 Set maximum Physical receive Packet Size=1520