32-bit IO Mode PCI Ethernet Adapter
	NDIS/3 DRIVER FOR WINDOWS 95 INSTALLATION
 ==========================================================


  Content:
  --------


(A).Install NDIS 3.1 driver to the Windows 95
    The drivers named E32ND3.SYS contained in the directory
    WIN95.


    NDIS Driver Installation on Windows 95
    --------------------------------------

    1. Plug 32-bit IO Mode PCI Ethernet adapter into one of the PCI
       slots of your PCI platform.
    2. Turn power on then boot from Windows 95.
    3. Windows 95 will prompt PCI Ethernet Controller in New Hardware Found
       dialog box.
    4. Select "Driver from disk provided by hardware manufacturer" from New
       Hardware Found dialog box, then click OK button.
    5. Insert the Driver Diskette in your floppy drive.
    6. Enter the driver pathname, i.e. A:\WIN95 (or B:\WIN95), then click OK
       button from Install from Disk dialog box.
    7. Select your installed adapter, that is
	       32-bit IO Mode PCI Ethernet Adapter
       then click OK button from Select Device dialog box.
    8. Follow screen instructions to complete the process.
    9. Restart your computer.


===End===