10/7/98 *********************************** 1. Make 2 bootable diskette 2. Unzip file into different directory then copy them to each diskette. 3. Please make sure R3BIO & R3Config should copy to the bootable diskette. To installation: 1. Use R3BIOS diskette to flash the BIOS on Raid Port III 2. Use R3Config diskette to Configuration Raid 0, 1, 5 disk 1= array BIOS & driver v4.20.10 scan array 1000u2 hardware then, auto-flashes array1000 BIOS v4.20.10 disk 2=bootable configurations, run prior to operating system driver installation. disk 3=for aro1130u2 NT,NETWARE AS DISK "A" disk 4=for aro1130u2 NT,netware as disk "B" Raid port III can be used on DBS and support RAID 0,1,5.