Adaptec 7800 Family Managers for NetWare 3.1X and 4.XX 
	 ======================================================

This diskette contains Adaptec's Novell solution for the AIC-7800 Family of
Host Adapters.  This includes:

      AHA-2910      PCI-to-Fast SCSI (non-bootable)
      AHA-2940      PCI-to-Fast SCSI
      AHA-2940W     PCI-to-Fast and Wide Single-Ended SCSI
      AHA-2944W     PCI-to-Fast and Wide Differential SCSI
      AHA-2940Ultra PCI-to-Wide UltraSCSI
      AHA-3940      MultiChannel PCI-to-Fast SCSI
      AHA-3940W     MultiChannel PCI-to-Fast and Wide SCSI
      AIC-7850      Single-Chip PCI-to-Fast SCSI
      AIC-7870      Single-Chip PCI-to-Fast and Wide SCSI
      AIC-7880      Single-Chip PCI-to-UltraSCSI


NOTE: To use CD-ROMs in conjunction with these drivers, EZ-SCSI version 3.03 
or above must be installed.


The following files on this diskette are required for the installation of the
NetWare drivers:

   NetWare 3.1x
       \netware\v3_1x\aic7870.dsk
       \netware\v3_1x\aspitran.dsk
       \netware\v3_1x\aspicd.dsk

   NetWare 4.xx
       \netware\v4_xx\aic7870.dsk
       \netware\v4_xx\aic7870.ddi
       \netware\v4_xx\aspitran.dsk
       \netware\v4_xx\aspicd.dsk
       \netware\v4_xx\aspicd.ddi

If required, please consult your DOS manual on how to move around the
directory tree.

Within a subdirectory, you will find a README.TXT file describing the
driver(s) contained in that subdirectory.


This disk provides the following NetWare drivers:

-----------------------------------------------------------------------------

1.) AIC-7870 Family of Host Adapters Driver For NetWare 386 v3.1x.

	  (\netware\v3_1x)

-----------------------------------------------------------------------------

2.) AIC-7870 Family of Host Adapters Driver For NetWare 386 v4.xx.

	  (\netware\v4_xx)

-----------------------------------------------------------------------------

3.) ASPITRAN.DSK ASPI Transport Layer Manager Driver for NetWare v3.1x and
    v4.xx.

	  (\netware\v3_1x)
		  or
	  (\netware\v4_xx)

-----------------------------------------------------------------------------

4.) AIC7870.DDI Driver definition information file for NetWare v4.xx only.

	  (\netware\v4_xx)

-----------------------------------------------------------------------------

5.) ASPICD.DSK CD-ROM Driver for NetWare v3.1x and v4.xx.

	  (\netware\v3_1x)
		   or
	    (.\netware\v4_xx)

-----------------------------------------------------------------------------

6.) ASPICD.DDI CD-ROM Driver definition information file for NetWare v4.xx
    only.

	    (.\netware\v4_xx)

-----------------------------------------------------------------------------

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Problem with DDI file for Netware 4.0X
--------------------------------------
There is a known problem which occurs during the installation of Netware 4.0X.
This problem involves the DDI file used during the initialization of the
host adapter device driver. The problem is that the DDI does not contain all
the possible slot number options available on all PCI systems, as there are
too many combinations. As a result, during the installation procedure, NetWare
will report that it was unable to load the driver in the given amount of time.
The cause of this is because the DDI file does not contain any slot options,
which causes NetWare to be unable to load the driver. Note, however, that this
is not an error. The user simply needs to go to the console screen and manually
enter in the correct slot number and installation will continue.