Additional Information MM CD16 Audio Setup Ver 1.01 This file contains additional information and changes about the various software that was not available at printing time. Multimedia Sound Card Easy Start ================================ There is an amendment to the above-mentioned documentation (Page 5): "Your sound includes 3 built-in AT-Bus CD-ROM Drive interface connectors. This allows you to connect either a Aztech, Mitsumi, Mitsumi, Panasonic or Sony AT-Bus CD-ROM drive to your sound card." Multimedia Sound Card User's Manual =================================== There is an amendment to the above-mentioned documentation (Page B-5). The CD-ROM Drive Options for the configuration program have been changed to the following: - Mitsumi LU005 - Mitusmi FX001 - Panasonic CR56x - Sony CDU33A - Aztech CDA268 - No CD-ROM AT-BUS CD-ROM Drives Support ============================ The sound card supports the following CD-ROM drives: Brand Models ----- ------ Panasonic - Model CR522/ 523/ 562 and 563 Mitsumi - Model LU005S/ FX001D Sony - Model CDU31A/ 33A Aztech - Model CDA268-01A The bundled CD-ROM device drivers supports only the following drives: Driver CD-ROM Model ------ ------------ CR56X.SYS - Panasonic CR562 & CR563 SGCDM.SYS - Mitsumi LU005S SGCD268.SYS - Aztech CDA268-01A Mitsumi CD-ROM Drivers ====================== The original Mitsumi CD-ROM device driver does not support the CD-ROM Port Addresses (63xH & 65xH) used by your sound card. To overcome this problem, a patch program (CDPATCH.EXE) is bundled together with the utility disk which can be found under the {...\DRIVERS} directory after installing the sound card software. This program will search and patch the original Mitsumi CD-ROM drivers (i.e. MTMCDAE.SYS, MTMCDAS.SYS or MTMCDE.SYS) in the {...\DRIVERS} directory automatically. The program will prompt the user before it proceed to modify the driver, and a message "... has been modified!" will be displayed upon successfully modifying of the drivers. If the driver is not the original version or it had been modified previously, the program will prompted "the file is not modified!". Therefore, Please run this program immediately after the installation of the original Mitsumi CD-ROM driver (via CONFIG.EXE utility and SETUP.EXE) before rebooting your system to load the Mitsumi driver. Microsoft CD-ROM Extensions (MSCDEX.EXE) ======================================== The above file is needed for operation of CD-ROM drives under the DOS environment. This file is only bundled with DOS version 6.x. Therefore, if you are using DOS version 5, please contact your local Microsoft's dealers for a copy of MSCDEX.EXE (for DOS version 5 usage). Installation on Win3.1x Platform ================================ On Windows 3.1x Operating System, choose 'Run' from the 'File' menu. Insert the Audio Installation Disk#1 into Drive A: (or Drive B:) and change the path to A:\setup (or B:\setup). For more details, you can refer to the Easy Start Manual. Installation on Windows 95 Platform =================================== Start up Windows 95 Operating System. Choose 'Run' from the 'Start' menu and insert the Audio Installation Disk#1 into Drive A: (or Drive B:) and change the path to 'A:\setup.exe' (or B:\setup.exe) and click OK to install the audio drivers as well as the application software. Upgrading from Win3.x to Win95 platform ======================================= If you have set up your audio card on a Win3.x platform and want to upgrade to Windows 95, remember to remove the audio drivers by doing a deinstallation first. For more details, you can refer to the Appendix section in the User's Manual. *********************************************************** * In case you encounter any problem with our products, * * please quote the following model(s) when calling our * * Technical Support : * * * * P16(CD)-3/-P/-PA/-PAII Sound Card * * * *********************************************************** ------- The End ---------