CRYSTAL* AUDIO HARDWARE DEVICE DRIVERS FOR USE WITH WINDOWS* NT 3.51 and 4.0 This Document contains the following: 1.0 Introduction 2.0 Version Numbers 3.0 List of files 4.0 File Summary 5.0 New Feature Summary 6.0 Installing Crystal Audio Drivers 7.0 Installing Compatible MPU-401 Driver 8.0 Installing Compatible Joystick Drivers 9.0 Un-installing Crystal Audio Drivers 10.0 Known Issues 11.0 Copyright and Trademarks -------------------------------------------------------------------------------- 1.0 Introduction: -------------------------------------------------------------------------------- This file contains last-minute updates. Please read this file before proceeding with the installation. Supported Hardware: CS4232, CS4236, CS4236B -------------------------------------------------------------------------------- 2.0 Version Numbers: -------------------------------------------------------------------------------- 1.71 CS32BA11.SYS 1.71 CS32BA11.DLL 1.71 CSPNP.INF 1.71 OEMSETUP.INF 1.71 CWAUDIO.BIN 1.71 CS.INI 1.71 MIDIMAP.CFG -------------------------------------------------------------------------------- 3.0 List of Files: -------------------------------------------------------------------------------- CS32BA11 DLL 125,440 07-01-97 5:10p CS32BA11 SYS 241,360 07-01-97 5:10p CSPNP INF 19,739 07-01-97 5:10p CWB3DSND EXE 262,144 07-01-97 5:10p CWBAUDIO BIN 8,225 07-01-97 5:10p MIDIMAP CFG 40,962 07-01-97 5:10p OEMSETUP INF 340 07-01-97 5:10p -------------------------------------------------------------------------------- 4.0 File Summary: -------------------------------------------------------------------------------- CS32BA11.SYS kernel mode driver support for CS423x family CWAUDIO.BIN Data file containing microcode for the CS4232, CS4232A, and CS4236. CS.INI Default initialization parameters for REGINI.EXE. CS32BA11.DLL User mode level driver support. CSPNP.INF Installation/Customization file. OEMSETUP.INF Installation file. MIDIMAP.CFG File utilized to allow the crystal midi support to be added to MIDI Mapper list. -------------------------------------------------------------------------------- 5.0 New Feature Summary: -------------------------------------------------------------------------------- A. Full .INF file support B. Customization (CSPNP.INF) for labels, volumes/mutes, XCTL bits, SPE bit. C. 3D applet support in NT 4.0 D. Seamless installation via .INF file E. New Configuration panel to allow modification of WSS/CTRL/SB addresses as well as IRQ and DMA settings. -------------------------------------------------------------------------------- 6.0 Installing Crystal Audio Drivers: -------------------------------------------------------------------------------- Note: These installation instructions assume that you have correctly installed Windows NT on your computer and that your system is able to boot and run without errors. If not, refer to the Windows NT User Manual for instructions before continuing. 1. If not already on, turn PC on and start up Windows NT. 2. NT 3.51: Double click the DRIVERS icon in the Control Panel. NT 4.0: Double click the Multimedia icon in the Control Panel and click on the Devices tab. 3. Press the ADD button. Select "Unlisted or Updated Drivers" and press "OK". 4. A dialog box will appear and request the path of the location of the driver files. You may search this path by clicking the BROWSE button. 5. Another dialog box will appear with the CrystalWare Audio Driver label. Press "OK" to continue with the installation. 6. If your system BIOS does not support Plug-and-Play, the Business Audio Setup dialog box will appear and request you to select the configuration resources. 7. Windows NT may ask you to restart your system. Even though it is not necessary to do so, we recommend that you click on the "Restart Now" button. -------------------------------------------------------------------------------- 7.0 Installing Compatible MPU-401 Driver - Windows NT 4.0 ONLY: -------------------------------------------------------------------------------- NOTE: You will need your Windows NT 4.0 installation disc(s). 1. Double click the Multimedia icon in the Control Panel and click on the Devices tab. 2. Upon clicking the ADD button, the ADD dialog box will appear. 3. Scroll down the list of drivers until you find the one labeled "MPU-401 Compatible Driver". Selected and press "OK". 4. A dialog box will appear and request the path of the location of the drivers to be installed. Place your installation CD or Setup Disk #2 on the corresponding drive and press "OK". The default path is the i386 directory. 5. The Generic MPU-401 Setup dialog box will pop up. To select the default configuration resources, press "OK". 6. Windows NT will ask you to restart your system. Press the "Restart Now" button. -------------------------------------------------------------------------------- 8.0 Installing Compatible Joystick Drivers - WindowsNT 4.0 ONLY: -------------------------------------------------------------------------------- NOTE: You will need your WindowsNT 4.0 installation disc(s). 1. Double click the Multimedia icon in the control panel and click on the Devices tab. 2. Upon clicking the ADD button, the ADD dialog box will appear. 3. Scroll down the list of drivers until you find the one labeled "Microsoft Sidewinder 3D Pro Joystick". Select it and press "OK". 4. The Install Driver dialog box will appear and request the location of the driver files. Place your installation CD or Setup Disk #2 on the corresponding drive. The default path to the Microsoft Sidewinder Joystick drivers is the i386 directory. 5. Once you have found the driver, press "OK" to complete the installation. 6. WindowsNT will ask you to restart your system. Press the "Restart Now" button. -------------------------------------------------------------------------------- 9.0 Un-installing Crystal Audio Drivers: -------------------------------------------------------------------------------- 1. NT 3.51: Double click the DRIVERS icon in the Control Panel. Once the DRIVERS dialog box appears, scroll down the list of drivers and select the entry labeled "Audio" for CrystalWare Audio Driver. NT 4.0: Double click the Multimedia icon in the Control Panel and click on the Devices tab. Double click on the "Audio Devices" entry and then select "Audio" for CrystalWare Audio Driver. 2. Press the REMOVE button. Verify your decision by pressing the "YES" button of the REMOVE dialog box. 3. The System Setting Change dialog box will appear and ask you to restart WindowsNT. Press the "Restart Now" button. -------------------------------------------------------------------------------- 10.0 Known Issues: -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- 11.0 Copyright and Trademarks: -------------------------------------------------------------------------------- * Other brands and names are the property of their respective owners.